Bob instructing the local worker, he is training to cut an arched opening.
After arched opening has been properly cut it is then installed. The wire mesh angles will be installed at each end and fastened to the 3-d panel walls.
Foam and rebar and angles or combinations of all will create this 3-d panel arched opening. The young man holding the ladder is the hardware store owner’s son I believe. Building with this 3-d panel product provides jobs and gives the local people a feeling of accomplishment.
The locals cutting rebar to length for the 3-d panel roof system.
Installing the rebar, this work is setting the rebar perfectly straight to a string line.
One of the locals checking out the 3-d panel project.
Setting the shoring prior to installing the 3-D Panels on the roof, on short panel spans such as this I prefer to set the shoring after the panels have been set, note the panels will hold them self up, but is necessary to shore before pouring the cement.
Installing roof panels. This is all I have on this project for now I will try to get finished photos at a later date.